U.S.S. ABBOT  ⭑  DD 629

Dictionary Search Results

Results: dry dock

dry dock, floating

nautical:  A hollowing floating structure of L- or U-shaped cross section, so designed that it may be submerged to permit floating a vessel into it, and that it may then raise the vessel and itself so that the deck of the dock and consequently the bottom of the vessel is above the level of the water. The bottom of a floating dry dock consists of one or more pontoons or rectangular-shaped vessels with high wing structure erected on one or both sides according to whether the section is to be L- or U-shaped. The deck of the pontoon is fitted with stationary keel blocks and movable bilge blocks which can be pulled under a vessel from the top of the wing structure. Pumps are fitted in the wings by which the dock can be quickly submerged or raised. Floating dry docks are used for repairing and painting the under-water portions of vessels and for docking a damaged vessel.

dry dock, graving

nautical:  A basin excavated at a waterway and connected thereto by gates or a caisson which may be opened to let a vessel in or out and then closed and the water pumped out. The dock is fitted with stationary keel blocks and movable bilge blocks, which usually are fitted on rack tracks, allowing them to be pulled under a vessel before the water is pumped out. Graving docks are common in navy yards, and although more expensive to construct than floating dry docks, they are practically permanent and supply a more rigid foundation for supporting a ship. The gate of a graving dry dock is usually a caisson which is a complete vessel in itself, having a strong rectangular-shaped keel and end posts which bear against the bottom sill and side ledges at the entrance of the dry dock. The caisson is designed so that its draft may be adjusted by water ballast until it bears against the sill and ledges and is equipped with flood valves and power pumps to make this adjustment. When a ship is to be docked, sluice valves in the caisson or in the deck structure are opened until the water in the dock reaches the same level as the water outside. The caisson is then floated to one side, allowing a vessel to enter the dock. The caisson is then floated back to close the entrance, completely separating the basin from the waterway, and after the vessel is lined up over the keel blocks the water is pumped out of the dry dock.

dry dock, railway

nautical:  A railway dock consists of tracks built on an incline on a strong foundation and extending from a distance in-shore sufficient to allow docking a vessel of the maximum size for which the dock is built, to a distance underwater sufficient to allow the same vessel to enter the cradle. The cradle running on the tracks may be of wood or steel fitted with keel and bilge blocks and sufficiently weighted to keep it on the track when in the water. A hoisting engine with a winding drum or wild cat is fitted at the in-shore end of the railway which operates the cradle by a cable or chain. This type of dry dock is used for docking small ships. It is commonly called a "marine railway".